Find Local Drywall Companies by Requesting An Estimate. Click HERE to Request Estimates From Local Contractors

When it comes time to choose a drywall company, or any other home improvements there are a few things to keep in mind to ensure you get the highest quality of work for the lowest price. Here is what I have found.

1. Do your homework.

Find out as much about the job at hand as you can. Look in the yellow pages, call local companies, do a web search, ask a friend. The more you know, the less can go wrong. You might even discover that you are capable of the job. There is no better way to save on home repair than to do it yourself.

2. Shop local.

It makes sense that the closer a company is to you, the less travel costs you are going to have to pay. Find out what companies are located in your area and give them a call. You’ll also reduce your carbon footprint, which is always a plus.

3. Don’t be afraid to haggle.

Remember, a substantial part of the cost you pay is in labor and profit, and no matter what they say, both are negotiable. Do not be afraid to name your price. I have found that companies are more likely to give you a better deal when you ask them to meet a specific price, and in the current economic climate, you’ll find companies are more flexible with their pricing.

4. Experience is key.

If possible, find out as much as you can about a company’s history. The longer a company has been around, the more likely it is that they do good work. A company with a bad reputation will find it hard to stay in business than a company that satisfies its customers. I’d wager that a fair amount of business is in repeat customers.

Well, that’s about it. I hope this article was helpful, and as always, take this with a grain of salt. Remember, no one can tell you the right way to do anything.

Cable company. they cam einto my aparmtent demanding to get in. they lied and said the land lady said i HAD ot let them in. ( i hadnt called them my cable was working fine). they pulled a bunhc of wires through and damaged the area around hte outlet (the dry wall). After that, I refuse to let them in my apartment. Now 3 or 4 apartments wires are messed up and they canot get cable. The apartment lady wanted me to let them in tof ix it. I told her no cause of the first time. Now all of the sudden she doesn’t remember the incident (was a year ago), and i called the cable company to get a copy of my complaint and they wont provide. Am i gong to be liable for all the damages they caused (the drywall, and /or the mis wiring of the apartments)???
you guys are no fucking help. "use spell check " and " ask a lawyer" shouldnt even qualify as real answers. u dont deserve 2 points for that.

I am worried that the contractor I hired to do home repairs will not repair damage caused during his repairs. Example: The storm dorm used to shut (it was tight before) but now it won’t shut. Also, drywall was removed with the cabinet sink when he took it out and he didn’t fix the wall before he put the sink back in and now there is a seam of holes all around it. Also, holes around new light fixture where the old light fixture was before. Surely they will fix these things right???
No I haven’t paid them in full. I paid half before starting and will pay the rest when I am satisfied that they are finished. I guess I’m afraid he is going to say that will cost extra for extra labor although to me you should expect things like that to happen when you are taking stuff out and putting it back and should repair it as you go along. Am I way off in my thinking or what? Example: when you tear off baseboards sometimes you are going to make holes, correct?

My bill last month cost me 0, which is kind of high, but I figured it’s just because the apartments is old, so the AC/heater unit uses a bunch of electric…that and the appliances are cheap and use a bunch as well I’m sure. It’s been floating around that range. I got the bill this month, and it says we owe 0 for the month of December. Now… we haven’t used any more electricity than last month, and I’m sure of this because we have even been trying to conserve to save some money. We’ve been turning everything off when we don’t use it, and have been trying to avoid using the heater. We’ve called the electric company to have them come out and do a reread, which is going to cost us , but the meter might say the same thing. The only thing I can think of is that they’ve been doing repairs in the apartment next door. The lady had to move out because of plumbing issues, and I know they’ve had to knock out some of her drywall to check for mold, and also doing other various repairs. It is possible that her apartment’s electric is being charged this way? And what should I do? I know there’s no way we owe so much and having us pay that amount is really unfair. Is there someone we can call other than the electric company ( who isn’t very helpful). Thanks for any help.

The owners and management company of the apartments I live in are in the process of renovating the building. They’re tearing down concrete walls to alter floor plan layouts, running new electrical lines, making roof repairs, and tearing up various parts of the property to install french drain systems. They’re also going to be ripping out every single window to replace them with new ones.

The problem is that they’re doing all of these things without a single building permit. There are also other major problems at the site that aren’t being addressed, such as the growth of a black mold recently discovered behind layers of old wallpaper – they’re simply painting over it! Severe water damage on the basement levels – large, saturated areas are visible on the carpeting and areas of drywall are literally just mush.

The work that IS being done goes on at all hours of the day and night! I’ve heard them wailing away at concrete wall as early as 7 am and as late as 11:45 pm (EST)!

Complaints to the company have gone unanswered, and I overheard some of the workers talking about how the "boss" was looking into how much rent I pay, when my lease is due to expire, and saying reports to any agencies are a matter of public record and that "he’ll find out and take care of it".

My question is who and what organizations can be contacted about these problems? What actions can I take and do I have any legal recourse if I am retaliated against?

My father died in June. I received a call from his best friend with the news, followed by, your dad’s house was just set today, the final inspection is tomorrow, you will need to be there.
That didn’t suck enough.
My dad’s friend (best friend) owned a construction company and his son works for a rival modular home company from the one my dad contracted. They both loved my dad very much and came prepared to punch holes in the contruction. They pointed out that the shingles where put on wrong, the drywall was wavy, and that the roof flip brackets where nailed though using a gun, instead of using the manufacturer’s preset holes and recommended nails, and the baseboard heater’s where not centered and undersized for the space. I noticed that hurricane ties where not nailed on both sides and that the cabinets in the kitchen where crooked, and a dented front door.
The builder has since stated that the roof is to expensive to fix, the flips are fine, and addressed the other issues.
Since then, with some help from his friend, I have started work on completing the house. His friend is handling the estate for me, and has been helping. Lately his job has changed, and he can’t be there that often. The house is a two hour drive for me, and actually I have’nt been able to actually meet up with him to help with the work for a couple of months. It’s just been me trying to get this stuff done. Besides he does spend alot of time working with the lawyer and the estate bills and stuff. I am in no way complaining about what he has done, just pointing out that the burden of finishing has shifted more my way than I orginally expected.
Since working on the house I have discovered that the wiring is a mess, 1/3 of the baseboard heat trips the breaker, they used 12-2 instead of 12-3 on 220 circuits, all the three switches I tested today return crazy mid range voltages indicating to me that there is voltage leaking between MANY of the lines, the smoke alarms haven’t stop beeping and I sense that this connected with the problem with voltages I discovered today, their are numerous plumbing blunders I am discovering while running the pipes to the fixtures and have paid to fix these from my own pocket, the garage is not set to match the sill, so that doors don’t line up and require a redo of all the door ways, they used single hung windows, and I everything I read in the paperwork for the house references double hung windows, they put holes in the garage for windows but say they are not supposed to supply those, and the house was suspisiously, partly sided.
Me and the executor, although we are on the same page, I believe need more help. I can not fathom trusting this place with the wiring problems alone I discovered today. We had taken this to the state attorney general a month ago about the roof, and the builder told them that it was to expensive to fix, and they would warrant it. Problem with that is, with this kinda of product I don’t expect them to be in business long. We where planning on taking them to a magistrate about the roof, but now I’m not sure what to do in light of the added problems.
My question really is, should I pay for an extremely thorough inspection of this building and try and get it condemned? Can i get it condemned and what would be the repricussions of such an action? I feal with the wiring issues I discovered today that this place is truely a fire trap. Luckily I have had enough sense not to leave any power on when I am not there since I started this project.

I currently work as an administrative assistant making about ,000/yr. I am thinking about getting into some kind of contracting work instead in my own business. How do I start my own contracting business (handyman, plumber, drywall, etc.) with little experience but still come close to making ,000/yr? This is around Philadelphia in south jersey. Do I need a license? What steps do I take?

I had my central A/C replaced with a new one yesterday. The HVAC company could not use the original refrigerant lines because the new A/C has R-410 refirgerant. They installed new lines along with the inside and outside units. The lines were placed right next to, and running along the side of a heating duct ( enclosed with drywall). The vent for the heating duct is just below the refrigerant lines and will blow hot air onto the refrigerant lines during the winter months.
I think the HVAC company may have thought it was a cold air duct. My question is whether this is a safe installation and whether the refrigerant lines and their insulation will break down faster with hot air being blown on them every winter?

i bought a condo recently and there was a fireplace defect which they had the chimneys fixed. the front part when i moved in was incomplete so i had a contractor put up drywall and a front on it. he didn’t get a permit (was he supposed to for just patching up the front of the fireplace)? he claims he didn’t need one to just fill a hole in the wall. so now the HOA says that their fireplace company they hired needs to redo the front at no cost to me but shouldn’t i also get reimbursed for the contractor’s work since i didn’t know about this? they told me if he has a permit then they will reimburse me and the fireplace company won’t have to redo it but if not i guess i have to suck up the cost and will have to have it redone. this seems unfair and i’m still wondering if the contractor should have a had a permit. who is in the right here?
i didn’t know that they (the HOA) were going to redo the front and i wasn’t aware before i hired my contractor.
i took the initiative because that’s INSIDE the unit which to my mind is always covered by the owner and HOA covers the OUTSIDE. so i didn’t know….

A company advertises in their info commercial for a hand held tool that will cut thru countertops up to 3/4 in thick, and countless other materials. It costs around 0. It looks like a straight edge with a angle towards the end. I believe it uses a vibration motion rathar than a circular motion. My son is remodeling a house and needs to cut thru plaster and lathe. He needs to be able to cut right up to the woodwork and then will replace with insulation and drywall. I watched a info commercial that had a tool that flush cut materials but I don’t remember the name of the company or the name of the tool. Does anybody know the name of this tool? Or know a tool that has a cutting blade that can flush cut right next to woodwork ?
I found the tool on the internet that I seen the info commercial for. It’s 0 not 0. It’s Fein’s Multi master tool. cuts wood, metal, tile, and more. Now I just need to decide how bad I really want it. thats pretty salty. Does anyone own one?